Home blue screen errors troubleshooting windows 10 windows 11

Troubleshoot Xhunter1.sys Blue Screen Errors on Windows 11/10: A Comprehensive Guide

Updated: • 0 • 14 min read

Troubleshoot Xhunter1.sys Blue Screen Errors on Windows 11/10: A Comprehensive Guide

Many Windows PC users have reported encountering Blue Screen of Death (BSOD) errors, specifically the DRIVER_IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA errors, with the xhunter1.sys file being identified as the cause. This file, xhunter1.sys, is a driver component from a third-party anti-cheat engine called XIGNCODE3 System Guard. This anti-cheat system is often integrated into online games to prevent cheating and maintain fair gameplay.

Users experiencing this issue report that the BSOD errors can occur in various scenarios. These include when launching a game, during active gameplay, or even after closing a game and returning to other applications. The common thread is the presence of the xhunter1.sys file in the error reports, indicating a problem with this specific driver. This guide provides a series of troubleshooting steps designed to help you resolve these xhunter1.sys related blue screen errors on your Windows 11 or Windows 10 system.

Troubleshooting Methods for Xhunter1.sys BSOD Errors

If you are experiencing blue screen errors associated with the xhunter1.sys file while gaming or performing other tasks on your Windows PC, the following solutions offer a range of approaches to address this issue. These methods are presented in no particular order, and applying them correctly should assist in resolving the error on your system.

  1. Install the xhunter1.sys driver in Compatibility Mode
  2. Delete the xhunter1.sys file
  3. Temporarily disable Driver Signature Enforcement and/or Memory Integrity
  4. Disable Paging File
  5. Troubleshoot using WinDbg
  6. Reinstall the game

Let’s explore each of these solutions in detail to understand how they can help resolve the xhunter1.sys blue screen error. If you can access your Windows system normally, you can proceed directly with these steps. However, if the BSOD errors prevent normal boot-up, you may need to boot into Safe Mode, access the Advanced Startup options, or use Windows Installation Media to implement these instructions.

1] Install the xhunter1.sys Driver in Compatibility Mode

Driver incompatibility is a common cause of system instability, especially when dealing with drivers designed for older operating systems. It’s possible that the xhunter1.sys driver is not fully compatible with the latest versions of Windows 11 or Windows 10, leading to conflicts and BSOD errors. Installing the driver in Compatibility Mode can often resolve these issues by emulating an older operating system environment for the driver to function correctly.

To install the xhunter1.sys driver in Compatibility Mode, follow these steps:

  1. Locate the driver setup file. This is usually found in the game’s installation directory or may be provided separately by the game developer or XIGNCODE3 provider.
  2. Right-click on the driver setup file.
  3. Select Properties from the context menu.
  4. Navigate to the Compatibility tab in the Properties window.
  5. Check the box labeled Run this program in compatibility mode.
  6. Click on the dropdown menu below and select a previous version of Windows, such as Windows 8, Windows 7, or even Windows XP. Experiment with different older versions if the first attempt is unsuccessful.
  7. Click Apply and then OK to save the changes.
  8. Run the driver installation file. Follow the on-screen instructions to complete the driver installation process.

After installation in Compatibility Mode, restart your computer and check if the xhunter1.sys blue screen error is resolved. You can also use the Program Compatibility Troubleshooter in Windows for further assistance with driver compatibility issues.

2] Delete the xhunter1.sys File

The xhunter1.sys file is associated with the XIGNCODE3 System Guardian, an anti-cheat program developed by Wellbia.com. This driver is typically installed alongside games that utilize the XIGNCODE3 anti-cheat system. In some cases, users may encounter the xhunter1.sys file on their system even without having any of these games currently installed. This can occur because it may be installed as a virtual driver or part of a previously installed game that was not completely removed.

If you do not actively play online games that rely on XIGNCODE3, and you suspect the xhunter1.sys file is causing instability, you can try deleting it. The system should automatically reinstall the driver when you launch a game that requires it in the future.

You can delete the xhunter1.sys file using two primary methods:

  • Driver Store Explorer (RAPR): This is a utility that allows you to manage installed driver packages. It provides a user-friendly interface to find and delete driver packages, including xhunter1.sys.
  • Safe Mode: Booting into Safe Mode starts Windows with a minimal set of drivers and services. This can allow you to delete the xhunter1.sys file if it is being protected or in use during normal Windows operation.

Using Driver Store Explorer (RAPR):

  1. Download and install Driver Store Explorer (RAPR).
  2. Run Driver Store Explorer as an administrator.
  3. In the list of driver packages, look for entries related to xhunter1.sys or XIGNCODE. You might need to sort by provider or file name to locate it easily.
  4. Select the xhunter1.sys driver package.
  5. Click Delete Package.
  6. Confirm the deletion if prompted.
  7. Restart your computer.

Deleting in Safe Mode:

  1. Boot your Windows 11/10 system into Safe Mode.
  2. Once in Safe Mode, open File Explorer.
  3. Navigate to C:\Windows\System32\drivers.
  4. Locate the xhunter1.sys file.
  5. Right-click on the file and select Delete.
  6. Confirm the deletion if prompted.
  7. Restart your computer to boot into normal Windows mode.

After deleting the file, monitor your system to see if the blue screen errors persist. If you encounter issues when launching a game that requires XIGNCODE3, the driver should be reinstalled automatically.

3] Temporarily Disable Driver Signature Enforcement and/or Memory Integrity

Windows uses Driver Signature Enforcement to ensure that only digitally signed drivers, verified by Microsoft, are loaded into the kernel. This is a security measure to prevent malicious or unstable drivers from compromising the system. Similarly, Memory Integrity is a feature that helps prevent malicious code from injecting itself into high-security processes.

In some cases, the xhunter1.sys driver might not be correctly digitally signed or might conflict with Memory Integrity, leading to loading failures and BSOD errors. Event Viewer logs might show Event ID 26 or Event ID 7000, indicating issues with loading or verifying the digital signature of xhunter1.sys.

As a temporary workaround, you can disable Driver Signature Enforcement and/or Memory Integrity to allow the driver to load. However, it is crucial to understand that disabling these security features reduces your system’s protection against potentially harmful drivers and malware. This should only be considered a temporary measure for troubleshooting, and you should re-enable these features as soon as possible, especially after gaming sessions.

Disabling Driver Signature Enforcement:

  1. Open Settings in Windows.
  2. Go to Update & Security and then Recovery.
  3. Under Advanced startup, click Restart now.
  4. After your PC restarts to the Choose an option screen, go to Troubleshoot > Advanced options > Startup Settings > Restart.
  5. After your PC restarts, you will see a list of options. Press 7 or F7 to select Disable driver signature enforcement.
  6. Windows will start with driver signature enforcement disabled.

Disabling Memory Integrity:

  1. Open Settings in Windows.
  2. Go to Privacy & Security and then Windows Security.
  3. Click on Device security.
  4. Under Core isolation, click on Core isolation details.
  5. Toggle the Memory integrity switch to Off.
  6. Restart your computer for the changes to take effect.

After disabling these features, try launching the game or performing the tasks that previously triggered the BSOD error. If the error is resolved, it suggests that driver signature enforcement or memory integrity was interfering with the xhunter1.sys driver. Remember to re-enable these features after troubleshooting or gaming sessions for security reasons. Consider contacting the game developer or XIGNCODE3 support to obtain a correctly signed driver.

4] Disable Paging File

The paging file, also known as a swap file or virtual memory, is a hidden system file on your hard drive that Windows uses as an extension of RAM. When your system’s physical RAM is full, Windows moves less frequently used data from RAM to the paging file to free up RAM for active processes. While the paging file helps manage memory and prevent system crashes due to memory exhaustion, it can sometimes contribute to issues, including BSOD errors, in specific configurations or with certain drivers.

Disabling the paging file is generally not recommended for most users as it can lead to performance degradation and instability if your system frequently runs out of physical RAM. However, as a troubleshooting step, temporarily disabling it can help determine if the paging file is contributing to the xhunter1.sys errors. If disabling the paging file resolves the issue, it might indicate a problem with how Windows is managing virtual memory or a conflict between the paging file and the driver. In such cases, instead of permanently disabling it, adjusting its size or location might be a better long-term solution. Alternatively, consider increasing your system’s physical RAM.

Steps to Disable the Paging File:

  1. Press Windows key + R to open the Run dialog box.
  2. Type sysdm.cpl and press Enter to open the System Properties window.
  3. Go to the Advanced tab.
  4. In the Performance section, click Settings.
  5. In the Performance Options window, go to the Advanced tab again.
  6. In the Virtual memory section, click Change.
  7. Uncheck the box Automatically manage paging file size for all drives.
  8. Select your system drive (usually C:).
  9. Select the radio button No paging file.
  10. Click Set.
  11. Click Yes on the warning prompt.
  12. Click OK on all open windows to close them.
  13. Restart your computer for the changes to take effect.

After restarting, test if the xhunter1.sys blue screen error is resolved. If disabling the paging file helps, consider increasing your physical RAM or investigating potential memory leaks from applications. If disabling the paging file causes other issues or does not resolve the BSOD, re-enable it by reversing the above steps and selecting “System managed size” or customizing the paging file size as needed.

5] Troubleshoot using WinDbg

The Windows Debugger (WinDbg) is a powerful tool provided by Microsoft for advanced troubleshooting of system crashes, including blue screen errors. WinDbg allows you to analyze crash dump files (memory dumps) created when a BSOD occurs. These dump files contain detailed information about the system state at the time of the crash, including loaded drivers, running processes, and error codes. Analyzing these dump files with WinDbg can pinpoint the exact cause of the BSOD, which can be invaluable for diagnosing driver-related issues like those involving xhunter1.sys.

Related: loading

Using WinDbg effectively requires a certain level of technical expertise and familiarity with debugging concepts. However, for persistent and difficult-to-diagnose BSOD errors, it can be a crucial tool.

Basic Steps to Troubleshoot BSOD Errors with WinDbg:

  1. Download and install WinDbg: You can download it as part of the Windows SDK (Software Development Kit) from the Microsoft website.
  2. Configure crash dump settings: Ensure that your system is configured to create crash dump files when a BSOD occurs. By default, Windows is usually set to create a minidump or a kernel memory dump. You can check and modify these settings in System Properties > Advanced > Startup and Recovery > Settings under “System failure”.
  3. Reproduce the BSOD error: Trigger the BSOD error again, if possible, so that a new crash dump file is generated.
  4. Locate the crash dump file: Crash dump files are typically saved as .dmp files in the %SystemRoot%\Minidump folder for minidumps or %SystemRoot% for kernel or complete memory dumps.
  5. Open WinDbg and load the crash dump file: Run WinDbg as an administrator. Go to File > Open Crash Dump and select the .dmp file.
  6. Analyze the crash dump: WinDbg provides various commands to analyze the dump file. Some common commands include:
    • !analyze -v: This command performs an automated analysis of the crash dump and provides detailed information about the crash, including the probable cause, error codes, and the module (driver or application) involved.
    • lm: This command lists loaded modules (drivers and DLLs) and can help identify if xhunter1.sys or other related modules are loaded and potentially causing issues.
    • .bugcheck: Displays the bug check code and parameters, providing more information about the type of BSOD error.

By using these and other WinDbg commands, you can gain deeper insights into the cause of the xhunter1.sys BSOD errors. Online resources and tutorials are available to help you learn more about using WinDbg for BSOD analysis. Consider consulting these resources or seeking assistance from technical forums or support communities if you are not familiar with debugging tools.

6] Reinstall the Game

If the xhunter1.sys blue screen errors are specifically occurring when launching or playing a particular game, reinstalling the game can be an effective solution. Game installations can become corrupted over time due to various factors such as file system errors, incomplete updates, or conflicts with other software. Reinstalling the game ensures that all game files, including necessary drivers like xhunter1.sys, are freshly installed and properly configured.

For a thorough reinstallation, it is recommended to use an Uninstaller Software utility. These tools not only uninstall the game but also remove associated files, registry entries, and leftover data that might be missed during a standard uninstall process. This helps ensure a clean slate for the new installation.

Steps to Reinstall the Game:

  1. Uninstall the game: Use Windows Settings > Apps > Installed apps (or Apps & features in older Windows versions) to find the game in the list of installed programs. Select the game and click Uninstall. Follow the on-screen instructions to uninstall the game.
  2. (Recommended) Use Uninstaller Software: After the standard uninstall, use a dedicated uninstaller program (such as Revo Uninstaller, IObit Uninstaller, or similar) to scan for and remove any remaining files and registry entries associated with the game.
  3. Restart your computer: After uninstalling, restart your system to ensure that all uninstall processes are completed and to clear any temporary files.
  4. Reinstall the game: Download the game installer from the official game website or platform (e.g., Steam, Epic Games Store) or use the original installation media. Run the installer and follow the on-screen instructions to reinstall the game.
  5. Update the game: After installation, ensure that the game is updated to the latest version by patching it through the game launcher or platform.

After reinstalling the game, launch it and check if the xhunter1.sys blue screen errors are resolved. If the issue was due to corrupted game files or installation problems, a clean reinstall should eliminate these factors. If the errors persist, proceed with other troubleshooting solutions.

Can I Remove xhunter1.sys?

Yes, it is possible to remove the xhunter1.sys file from your Windows system, especially after uninstalling a game that uses the XIGNCODE3 engine. Removing it might be desirable if you no longer play games that require this anti-cheat system or if you suspect it’s causing issues.

Removing xhunter1.sys using Registry Editor:

  1. Press WinKey + R to open the Run dialog box.
  2. Type regedit and press Enter to open Registry Editor.
  3. In Registry Editor, go to Edit > Find (or press Ctrl + F).
  4. Type xhunter in the Find what field and click Find Next.
  5. Registry Editor will search for entries containing “xhunter” and highlight the first result.
  6. Carefully examine the result. If it is related to XIGNCODE or xhunter1.sys, you can consider deleting the highlighted folder or registry key. Be extremely cautious when deleting registry entries as incorrect modifications can cause system instability. It is advisable to back up the registry before making changes.
  7. To delete, right-click on the highlighted folder or key and select Delete.
  8. Repeat steps 3-7 by pressing F3 (Find Next) to search for and delete all relevant entries related to “xhunter” or XIGNCODE.
  9. After cleaning up the registry, manually delete the xhunter1.sys file located in C:\Windows\System32\drivers. You might need to boot into Safe Mode to delete it if it’s in use.
  10. Restart your computer.

Caution: Modifying the Windows Registry should be done with extreme care. Incorrect changes can lead to serious system problems. It is highly recommended to back up your registry before making any changes. If you are not comfortable with editing the registry, consider using Driver Store Explorer or simply deleting the xhunter1.sys file from Safe Mode as described in a previous section.

What is a Xigncode Error?

XIGNCODE errors are issues encountered with the XIGNCODE3 anti-cheat system. These errors can prevent games from launching or cause instability during gameplay. Different error codes indicate different types of problems. Understanding these error codes can help in diagnosing and resolving the issues.

Here is a table summarizing some common XIGNCODE error codes and their descriptions:

Error Code Description Potential Cause
0xE0010001 ~ 0xE0010007 Internal XIGNCODE problem Internal error within the XIGNCODE3 system.
0xE0190101 ~ 0xE0190109 XIGNCODE files are damaged Corrupted or missing XIGNCODE3 files.
0xE0191005 Game client duplicate launches Attempting to launch the game client multiple times simultaneously.
0xE019100B Detection of program usage irrelevant to the game Running programs detected as potentially interfering with the game or anti-cheat.
0xE0191006 XIGNCODE process issue during initial launching stage Problem during the startup process of XIGNCODE3.
0xE0191007 Irregular game client launched Launching the game client in an unintended or modified way.
0xE0191009 XIGNCODE issue during the update process Problem during the update process of XIGNCODE3.
0xE019100C PC blocked due to previous hack tool usage System flagged for previous use of hacking tools in games using XIGNCODE3.

When you encounter a XIGNCODE error, note the error code and consult the game’s support website or XIGNCODE3 support resources for specific troubleshooting steps related to that error code. Common solutions often involve verifying game file integrity, reinstalling the game, updating XIGNCODE3 (if possible separately), or ensuring no conflicting software is running.

By following these comprehensive troubleshooting steps, you should be able to identify and resolve the xhunter1.sys blue screen errors on your Windows 11/10 system. Remember to proceed methodically and test your system after each step to determine which solution works for you.

If you have further questions or have found another solution that worked for you, please share in the comments below! Your experiences can help other users facing similar issues.

Post a Comment